Every pascal and every degree on site, turned into data you can act on
Quantara supplies process sensors, signal conditioning and on-site engineering support for water treatment, energy, food and general industry. Auditable calibration records, process connections matched to your piping and long-term supply commitments keep your plant running.
- Reference accuracy
- ±0.1% FS
- Output
- 4–20 mA / Modbus
- Typical protection
- IP67
- Product families covering pressure, temperature, flow, level and signal conditioning
- 5
- Common media temperature range, depending on probe and connection
- −40…150 °C
- Common outputs and protocols: 4–20 mA, 0–10 V, RS-485, pulse
- 4
- Target for a first selection answer once process data is complete
- 1 business day
Numbers go into the documents. Commitments go onto the site.
Sensor problems rarely come from the measuring range itself. They come from connections, media, pulsation and grounding. We resolve those during selection, not during commissioning.
Calibration you can audit
Each instrument ships with span, zero and temperature-compensation point records, matched to the serial number on the body.
Process connections for your piping
G1/2, NPT1/2, clamp and flange connections are selected against the actual line, with a mounting accessory list to limit site rework.
One path from signal to data
Transmitters, isolators, surge protection and Modbus aggregation can be delivered as one set, so protocol and grounding ownership stays clear.
Support built around the site
Selection sheets, installation drawings and commissioning checklists. For difficult media we assess compatibility, pulsation and crystallisation first.
Five families covering the core of process measurement
The same signal and connection logic runs through all five families, so spares, commissioning and maintenance habits carry over.
Pressure transmitters
Gauge / absolute / differential
Piezo-resistive and thin-film capacitive sensing for clean gases, steam and viscous media.
Temperature sensors
Pt100 / Pt1000 / thermocouple
Integrated transmitters and sheathed probes for pipes, tanks and surface measurement.
Electromagnetic flow meters
Volumetric flow of conductive liquids
Compact and remote versions from DN15 to DN300, with liner and electrode options for the medium.
Level instruments
Submersible / radar / ultrasonic
Clean water, wastewater and tank level measurement, chosen by foam, steam and mounting space.
Signal conditioning & gateways
Isolation / conversion / aggregation
Turn field analogues and serial devices into one data outlet, reducing integration effort.
Built to work where water, steam and vibration live
The difference between sites is rarely the instrument. It is the mounting position, the medium and the maintenance window.
- 01
Water & wastewater
Pump discharge pressure, dosing line flow and basin level, where humidity and long-term drift matter.
- 02
HVAC & buildings
Supply and return temperature difference, network differential pressure and make-up water metering.
- 03
Food & beverage
Temperature and pressure under CIP cycles, where connection hygiene and thermal shock matter.
- 04
Energy & general industry
Steam, thermal oil and compressed air lines, where heat, pulsation and noise dominate.
From a process description to a selection you can execute
You do not need a complete datasheet first. Tell us the medium, temperature, pressure and mounting position.
Confirm the process
Medium, temperature, pressure, line size and space. We check for pulsation, crystallisation and electrical noise.
Selection and quotation
Model, process connection, output and accessories, with the reasoning and alternatives stated.
Calibration and factory test
Calibrated at the confirmed points; zero, span and compensation data recorded and shipped with the unit.
Delivery and commissioning
Installation and wiring instructions, plus remote help with zero verification and communication checks.
State the limits first. Then talk about performance.
Quantara is an engineering-led brand built around process measurement. We believe trustworthy data starts with stated conditions: what lies beyond the range, whether the medium is compatible, whether the installation is right.
No inflated figures
Datasheets list typical values. Delivery is defined by the confirmation and factory records.
Connections matched to site
No customer should rebuild a pipe run for one sensor.
Traceable documentation
Model, batch and calibration points correspond, for acceptance and later verification.
Field experience and product updates
We turn recurring commissioning issues into reusable notes, and publish product and documentation updates here.
No published updates yet. You can read the engineering notes below for selection and installation guidance.
Send us the process. Get a selection you can act on.
Medium, temperature, pressure range and mounting position are enough. We reply with model options, connection choices and the points still to confirm.
Form details are used only for this enquiry.